We’ve been expecting it, Mr Bond…and finally it’s here.
The gadget-laden Aston Martin DB5, which made its big-screen debut driven by 007 star Sir Sean Connery in the 1964 James Bond movie Goldfinger, has been reborn in the 21st century after a gap of more than half a century.
Arguably the most famous Aston Martin ever – and possibly the most recognisable car in the world – it has entertained millions of fans and generations of children who have played with their own treasured toy versions.
Now some 55 years after the last DB5 was built, the very first in an exclusive limited customer run of just 25 brand-new hand-crafted classic DB5 Goldfinger Continuation cars has rolled off the production line – complete with most of the working gadgets that made it famous. And we’ve had exclusive access to the collectible machine.
From fiction to reality: This is the first of 25 Aston Martin Goldfinger DB5 Continuation Cars, each one with an asking price of £3.3million
The inaugural ‘Job 1’ car – not to be confused with the lethally steel-hatted Goldfinger henchman, Oddjob – comes with a £3.3million price-tag, which is 790 times more than the original cost.
First deliveries to well-heeled customers and collectors begin from this week and continue for the rest of the year up to someone’s extra-special Christmas.
The good news for those with the wherewithal is that with three-quarters of the limited production run of 25 now sold, there is still a chance to buy one.
Its blazing machine guns, revolving number plate, tyre-slasher wheels, emerging bullet-proof shield and – most memorable of all – the passenger ejector seat, made the 007 DB5 a legendary vehicle in the Swinging Sixties and beyond.
Toy firm Corgi’s version was a favourite of children – and of collectors today – though the gun-toting villain ejected through the roof was forever getting lost.
Dubbed ‘the most famous car in the world’ fewer than 900 original DB5 saloons were built between 1963 and 1965 priced from £4,175.
The gadget-laden Aston Martin DB5, which made its big-screen debut driven by 007 star Sir Sean Connery in the 1964 James Bond movie Goldfinger, has been reborn in the 21st century after a gap of more than half a century
The continuation models will feature many of the gadgets from the iconic 1964 film in which the DB5 starred, including a reart smoke screen and bulletproof shield
The original car in all its glory: Sean Connery leans up against the DB5 in Goldfinger, which went on to become one of the most famous film cars of all time
The DB5 has featured in six subsequent 007 films, including GoldenEye in 1995 with Pierce Brosnan playing Bond
After the DB5 appeared in Goldfinger in 1964, it created such a sensation that Corgi brought out a toy version the following year. Complete with ejector seat, machine guns and bullet-proof shield, and available in gold or silver, 2.5million were sold
The new cars, with some of the working MI6 Q-Branch gadgets, each take 4,500 hours to hand- build, under strict social distancing and safety measures prompted by the coronavirus pandemic.
With brutal timing, the first finished continuation car arrives just two months after the company’s boss of six years, Dr Andy Palmer, who signed off the project, was himself unceremoniously dispatched via the corporate ejector seat in a boardroom purge.
The working Goldfinger gadgets were specially recreated by Aston Martin engineers and Oscar-winning special effects guru Chris Corbould, who has worked on more than a dozen Bond films.
Left: The car appears to be a standard DB5. Right: With the front battering ram extended, machine guns at the ready and bulletproof shield extended, the Continuation Car reveals its big-screen heritage
The £3.3m Continuation Goldfinger DB5s have an oil-slick delivery system, firing the fluid from jets hidden behind the indicator lights
The smoke screen in full effect on Job1 of the 25 Continuation Cars. Due to gadgets like this, the car is not road legal and aimed at collectors who can use them on private land
Gadgets inside the car comprise: a secret weapons and storage tray under the seat; a simulated radar screen tracker map; telephone in driver’s door; flip-top gear knob actuator button (for a notional ejector seat); an armrest and centre console hiding gadget switches; and a remote-control to activate gadgets
But to the disappointment of many, a fully functioning ejector seat proved just too much for the health and safety minders. The nearest nod to it is a removable passenger seat roof panel. Machine guns will be ‘design features’ rather than working weapons and the tyre slashers don’t extend on the continuation car for safety reasons.
As it’s not legal to drive on the road, it is being aimed directly at wealthy collectors and enthusiasts who will be constrained to driving it on private land and tracks.
Production of the reborn DB5 Goldfinger Continuation comes 55 years after the last new DB5 left Aston Martin’s Heritage Division headquarters at Newport Pagnell.
There is no ejector seat, disappointingly. But Aston Martin’s team of skilled hand-builders have cut out a roof panel to suggest you can launch an unwelcome passenger out of the vehicle
First deliveries of the Aston Martin Goldfinger Continuation Cars to well-heeled customers and collectors begin from this week and continue for the rest of the year up to someone’s extra-special Christmas
The replica machine guns appear from behind the front indicator lamps at the push of a button on the control panel in the cabin
This gadget control panel operates everything from the oil slick deployment to the revolving number plates
Aston Martin said it is ‘the first in a strictly limited run of 25 customer cars’ recreating ‘the most famous car in the world’ in association with EON Productions, makers of the James Bond films.
The iconic British car brand said: ‘Scores of the UK’s most talented craftspeople and engineers put the finishing touches to the first in a new but very familiar series of Aston Martin sports cars, as the first customer car in the DB5 Goldfinger Continuation programme left the production line.’
It added: ’The ‘Job 1’ DB5 represents not only another significant design and engineering success, but also becomes the first new DB5 to be built by Aston Martin in more than half a century.’
The bulletproof shield extends out of the boot to protect Bond – and well-heeled buyers of replica cars – from gunfire
The front battering ram extended. There’s also one to the rear, just in case a villain is trying to shunt into your Aston from behind
The iconic number plates from the film car will be replicated on all the Continuation models. And they can be rotated, just as 007 did in the films
The front number plates have the same functionality. It will be one of the key features Bond fans will be looking for
The oil-slick delivery system seen close up. In order to protect the paintwork and chrome on the car, it will instead eject water
All the rear-wheel drive DB5 Goldfinger Continuation cars are available in just the original exterior Silver Birch paint – exactly how it is in the films
Exterior gadgets that do fully function include: revolving number plates; simulated twin front machine guns; simulated tyre slasher; bullet proof rear shield; battering rams front and rear; a rear smoke screen delivery system; oil slick delivery system; and a removable passenger seat roof panel to suggest an ejector seat exit.
Gadgets inside the car comprise: a secret weapons and storage tray under the seat; a simulated radar screen tracker map; telephone in driver’s door; flip-top gear knob actuator button (for a notional ejector seat); an armrest and centre console hiding gadget switches; and a remote-control to activate gadgets.
All the rear-wheel drive DB5 Goldfinger Continuation cars are available in just the original exterior Silver Birch paint.
The cars are powered by a 290bhp 4.0-litre naturally aspirated inline six-cylinder engine, linked to a five-speed manual gearbox
The tyre slashers – seen here hidden behind the wheel hubs – don’t extend on the continuation car for safety reasons
Here’s how the gadget should operate, as seen on the one of the Bond-film cars from yesteryear
The structure of the reborn cars is aluminium exterior body panels wrapped around an authentic DB5 mild steel chassis.
The cars are powered by a 290bhp 4.0-litre naturally aspirated inline six-cylinder engine, linked to a five-speed manual gearbox.
Aston Martin said: ‘By far the most famous of the original owners is the world’s best-known secret agent – James Bond – who first drove the car that is today inextricably linked with him in the 1964 film, Goldfinger.’
‘Created in association with the producers of the James Bond films, EON Productions, and featuring a broad suite of working gadgets first seen on screen in the 1964 film, the Aston Martin DB5 Goldfinger Continuation cars are history in the making. ‘
he new cars, which won’t be road legal, will each take 4,500 hours to build at Aston Martin Works based at the brand’s historic home of Newport Pagnell – under strict social distancing and safety measures prompted by the coronavirus pandemic
Owners will truly feel like their a secret agent, with the car featuring the ejector seat trigger button hidden under the panel on the top of the gearkob
The armrest and centre console has a hidden panel housing some of the gadget switches
Images of the first Continuation Car, exclusively revealed first to the Daily Mail, show the simulated radar screen tracker map that;s hidden behind a panel
The car even gets the in-built telephone, hidden in a panel in the door insert
It is the latest project of Aston’s Continuation car programme, which began in 2017 with the DB4 GT Continuation.
The firm said: ‘The new DB5 models represent among the most valuable new cars yet brought to market by the British luxury brand. Each DB5 Goldfinger continuation car is priced at £2.75m, plus taxes.’
With VAT at 20 per cent, that totals £3.3million.
It added: ‘All the new cars are meticulously detailed authentic reproductions of the DB5 seen on screen, with some sympathetic modifications and enhancements to ensure the highest levels of build quality and reliability. ‘
After the DB5 appeared in Goldfinger in 1964, it created such a sensation that Corgi brought out a toy version the following year. Complete with ejector seat, machine guns and bullet-proof shield, and available in gold or silver, 2.5million were sold. In 2018 Lego launched a 1,290-piece version, costing £129.99.
Will it fit in 007’s garage? Aston Martin DB5 Goldfinger Continuation Car
Price new in 1964: £4,175
Engine: 4.0-litre DOHC naturally aspirated inline six-cylinder
Gears: five-speed manual
0-60mph: 7.1 seconds
Top speed: 148mph
Time to build each car: 4,500 hours
• Simulated twin front machine guns
• Bullet resistant rear shield
• Revolving number plates front and rear (triple plates)
• Battering rams front and rear
• Simulated tyre slasher
• Removable passenger seat roof panel (optional equipment)
• Rear smoke screen delivery system
• Rear simulated oil slick delivery system
• Simulated radar screen tracker map
• Telephone in driver’s door
• Gear knob actuator button
• Armrest and centre console-mounted switchgear
• Under-seat hidden weapons/storage tray
• Remote control for gadget activation
The DB5 has featured in six subsequent 007 films – Thunderball, GoldenEye, Tomorrow Never Dies, Casino Royale, Skyfall and Spectre. It is set to make another appearance in the next movie ‘No Time to Die’, delayed from Spring due to the global hold-up caused by Covid-19.
There are plans for three more cars in addition to the 25 for customers: one for Bond movie makers EON Productions, one to remain with Aston Martin and a third to be auctioned for charity.
However Aston Martin stressed: ‘The car is not road legal. The fitment of gadgets is subject to final engineering confirmation and country-specific legislation.’
Production of the reborn ‘DB5 Goldfinger Continuation’ cars began on Thursday 28 May, meaning the first took over a month to complete
The build of ‘Job 1’ comes some 55 years after the last new DB5 left Aston Martin’s Newport Pagnell factory
EON Productions talked their James Bond special effects team to work on the gadgets which were first seen in Goldfinger
Paul Spires, president of Aston Martin Works where the original and re-born DB5s were built said: ‘To see the first customer car finished, and realise that this is the first new DB5 we have built in more than half a century, really is quite a moment.
‘I’m absolutely certain that the 25 lucky owners who will take delivery of these cars will be thrilled with them. We are making, perhaps, some of the most desirable ‘toys’ ever built.’
He added: ‘Scores of world-class Aston Martin craftsmen and women, technicians, development engineers and designers have been involved in the project.
‘They’ve been working carefully with a suite of handpicked suppliers from across the world and ensuring that each new DB5 matches not only the aspirations of its owner, but also the duty to the brand’s proud 107-year heritage.’
The rear light cluster housed an oil spray device and the opposing side a caltrops nail ejector
If you want one of the cars, only three quarters have been sold. You will need to have a cool £3.3m in your bank account, though
Paul Spires, president of Aston Martin Works, said: ‘We are making, perhaps, some of the most desirable ‘toys’ ever built’
Heritage programme manager Clive Wilson said: ‘We have not, as a business, made a new DB5 for more than 50 years. So to be involved in the building of these cars, which will go on to form part of Aston Martin’s history, is something I’m sure all of us will be telling our grandkids about!’
After all, would you expect 007 to walk? No, you’d expect James Bond to drive.
Some links in this article may be affiliate links. If you click on them we may earn a small commission. That helps us fund This Is Money, and keep it free to use. We do not write articles to promote products. We do not allow any commercial relationship to affect our editorial independence.